Determination of ethanol content in intermediate products during the production of blood products by GC
doi: 10.3969/j.issn.1006-0111.2019.05.015
- Received Date: 2018-12-12
- Rev Recd Date: 2019-04-02
-
Key words:
- intermediate products /
- ethanol /
- blood products /
- GC /
- determination
Abstract: Objective To establish a method for determination of ethanol content in intermediate products during the production of blood products by GC. Methods DB-624 column was used with FID detection.The temperature of the injector and detector was 230℃,280℃,respectively.The column temperature was kept at 40℃ for 5 minutes,then increased to 80℃ at 10℃ per minute,and finally to 230℃ at 50℃ per minute for 3 minutes.N-propanol was used as the internal standard. Results The standard curve was linear in the range of 0.05%-5%(r=1.000 0) for ethanol.The average recovery was 99.28% with RSD of 0.01%(n=9). Conclusion This method was simple,sensitive,accurate and reliable.It is suitable for the determination of ethanol content in intermediate products during the production of blood products.
Citation: | SHENG Fengxian, LI Ping. Determination of ethanol content in intermediate products during the production of blood products by GC[J]. Journal of Pharmaceutical Practice and Service, 2019, 37(5): 464-465,469. doi: 10.3969/j.issn.1006-0111.2019.05.015 |