Message Board

Respected readers, authors and reviewers, you can add comments to this page on any questions about the contribution, review,        editing and publication of this journal. We will give you an answer as soon as possible. Thank you for your support!

Name
E-mail
Phone
Title
Content
Verification Code

ZHU Quan-gang, ZHANG Di, ZHOU Zhi-yun, PAN Yong-hua, YOU Ben-ming, LIU Ji-yong, GAO Shen. Preparation and determination of ropivacaine hydrochloride thermosensitive gel injection[J]. Journal of Pharmaceutical Practice and Service, 2013, 31(5): 366-367,383. doi: 10.3969/j.issn.1006-0111.2013.05.013
Citation: ZHU Quan-gang, ZHANG Di, ZHOU Zhi-yun, PAN Yong-hua, YOU Ben-ming, LIU Ji-yong, GAO Shen. Preparation and determination of ropivacaine hydrochloride thermosensitive gel injection[J]. Journal of Pharmaceutical Practice and Service, 2013, 31(5): 366-367,383. doi: 10.3969/j.issn.1006-0111.2013.05.013

Preparation and determination of ropivacaine hydrochloride thermosensitive gel injection

doi: 10.3969/j.issn.1006-0111.2013.05.013
  • Received Date: 2012-10-17
  • Rev Recd Date: 2013-03-13
  • Objective To prepare ropivacaine hydrochloride thermosensitive gel injection and establish the determination methods of contents. Methods Ropivacaine hydrochloride thermosensitive gel injection was prepared by cold methods with poloxamer as thermosensitive materials. The contents of ropivacaine hydrochloride were determined by RP-HPLC. Result The formulation contained 2% ropivacaine hydrochloride, poloxamer P407 and P188 (28:1) with phase-transition temperature of 37℃. Ropivacaine hydrochloride presented a good linearity in the range of 2.03~48.72 μg/ml (r=0.999 8), which had good precision, and reproducibility. The recovery rate of low, middle and high concentrations of ropivacaine hydrochloride were (99.58±0.20)%, (97.80±0.35)% and (103.60±0.63)%,n=3,respectively. The average contents of ropivacaine hydrochloride in three batches of sample were (98.92±0.35)%, (99.18±0.38)% and (98.72±0.62)%,n=3. Conclusion The quality of Ropivacaine hydrochloride thermosensitive gel injection with poloxamer as matrix could be controlled. It had a new development prospects for relieving pain.
  • [1] Akoglu E, Akkurt BC,Inanoglu K,et al. Ropivacaine compared to bupivacaine for post-tonsillectomy pain relief in children: A randomized controlled study[J].In J Pediatr Otorhinolaryngol,2006,70(7):1169.
    [2] 顼佳音, 杨洪军, 熊 欣, 等. 常见温度敏感型原位凝胶载体的研究进展[J]. 中国实验方剂学杂志, 2011,17(2):252.
    [3] Seo HJ,Kim JC.Effects of additives on phase transitions of Poloxamer 407/Poloxamer 188 mixture and release property of monoolein cubic phase containing the poloxamers[J].J Ind Eng Chem,2012,18(1):88.
    [4] 陈 钢,侯世祥,秦凌浩. 动态流变实验评价温敏凝胶的方法研究[J].中国药学杂志,2008,43(6):444.
    [5] 陆松伟,朱全刚,陈方剑,等.用RP-HPLC法测定三利乳膏中盐酸利多卡因的含量[J].药学服务与研究,2011,11(4),291.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article Metrics

Article views(2869) PDF downloads(80) Cited by()

Related
Proportional views

Preparation and determination of ropivacaine hydrochloride thermosensitive gel injection

doi: 10.3969/j.issn.1006-0111.2013.05.013

Abstract: Objective To prepare ropivacaine hydrochloride thermosensitive gel injection and establish the determination methods of contents. Methods Ropivacaine hydrochloride thermosensitive gel injection was prepared by cold methods with poloxamer as thermosensitive materials. The contents of ropivacaine hydrochloride were determined by RP-HPLC. Result The formulation contained 2% ropivacaine hydrochloride, poloxamer P407 and P188 (28:1) with phase-transition temperature of 37℃. Ropivacaine hydrochloride presented a good linearity in the range of 2.03~48.72 μg/ml (r=0.999 8), which had good precision, and reproducibility. The recovery rate of low, middle and high concentrations of ropivacaine hydrochloride were (99.58±0.20)%, (97.80±0.35)% and (103.60±0.63)%,n=3,respectively. The average contents of ropivacaine hydrochloride in three batches of sample were (98.92±0.35)%, (99.18±0.38)% and (98.72±0.62)%,n=3. Conclusion The quality of Ropivacaine hydrochloride thermosensitive gel injection with poloxamer as matrix could be controlled. It had a new development prospects for relieving pain.

ZHU Quan-gang, ZHANG Di, ZHOU Zhi-yun, PAN Yong-hua, YOU Ben-ming, LIU Ji-yong, GAO Shen. Preparation and determination of ropivacaine hydrochloride thermosensitive gel injection[J]. Journal of Pharmaceutical Practice and Service, 2013, 31(5): 366-367,383. doi: 10.3969/j.issn.1006-0111.2013.05.013
Citation: ZHU Quan-gang, ZHANG Di, ZHOU Zhi-yun, PAN Yong-hua, YOU Ben-ming, LIU Ji-yong, GAO Shen. Preparation and determination of ropivacaine hydrochloride thermosensitive gel injection[J]. Journal of Pharmaceutical Practice and Service, 2013, 31(5): 366-367,383. doi: 10.3969/j.issn.1006-0111.2013.05.013
Reference (5)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return